Self-drill metal tile sheet screw DP1
Home / Products / Self-drill metal tile sheet screw DP1

Self-drill metal tile sheet screw DP1

Steel ≤ 1,5 MM - SS SUS410 Article number: 20030
  • Washer diameter:
    19 mm
    • 14 mm
    • 16 mm
    • 19 mm
  • Coating:

Base

Application

Metal Sheets SS SUS410 Steel ≤ 1,5 mm

Specifications

  1. Head style 5/16” (8 mm)
  2. Washer diameter standard 14 mm
  3. SS EPDM bond seal
  4. Thread for substructure steel ≤ 1,5 mm
  5. Drilling point 1

Options

  1. Powder coated in any desired RAL colour
  2. Washer diameter 16 or 19 mm

Certificates

Section

2D 2D 2D

Order information

ProductSize (L)PackagingArticle code
Self-drill metal tile sheet screw 4,8 x 20 - DP120 mm250 pcs/box2003024801916
Self-drill metal tile sheet screw 4,8 x 28 - DP128 mm250 pcs/box2003014802814
Self-drill metal tile sheet screw 4,8 x 35 - DP135 mm250 pcs/box2003014803514

Mechanical properties

14 mm
16 mm
19 mm
Materials
Screw SS 1.4006 (SUS410) - conform EN3506
Bond washerSS 1.4301 (A2) - conform EN3506
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
Washer diameter 14 mm
tN1 [mm] tII [mm]
0.4 0.5 0.55 0.63 0.75 0.88 1 1.13 1.25 1.5 2
VR,k [kN] 0.4 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57
0.5 0.57 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95
0.55 0.57 0.95 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19
0.63 0.57 0.95 1.19 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57
0.75 0.57 0.95 1.19 1.57 2.15 2.15 2.15 2.15 2.15 2.15 2.15
0.88 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1.13 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1.25 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
NR,k [kN] 0.4 0.33 0.54 0.61 0.71 0.88 1.26 1.26 1.26 1.26 1.26 1.26
0.5 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 1.96 1.96 1.96
0.55 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.07 2.07 2.07
0.63 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.24 2.24
0.75 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.51 2.51
0.88 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.51 2.51
1 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.51 2.51
1.13 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.51 2.51
1.25 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.51 2.51
  • Above mentioned values are characteristic values
  • To determine the design value we advise to apply a material factor or γm = 1,33
Materials
Screw SS 1.4006 (SUS410) - conform EN3506
Bond washerSS 1.4301 (A2) - conform EN3506
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
Washer diameter 16 mm
tN1 [mm] tII [mm]
0.4 0.5 0.55 0.63 0.75 0.88 1 1.13 1.25 1.5 2
VR,k [kN] 0.4 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57
0.5 0.57 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95
0.55 0.57 0.95 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19
0.63 0.57 0.95 1.19 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57
0.75 0.57 0.95 1.19 1.57 2.15 2.15 2.15 2.15 2.15 2.15 2.15
0.88 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1.13 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1.25 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
NR,k [kN] 0.4 0.33 0.54 0.61 0.71 0.88 1.29 1.29 1.29 1.29 1.29 1.29
0.5 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 1.98 1.98 1.98
0.55 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.21 2.21
0.63 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.57 2.57
0.75 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.12
0.88 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.12
1 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.12
1.13 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.12
1.25 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.12
  • Above mentioned values are characteristic values
  • To determine the design value we advise to apply a material factor or γm = 1,33
Materials
Screw SS 1.4006 (SUS410) - conform EN3506
Bond washerSS 1.4301 (A2) - conform EN3506
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
Washer diameter 19 mm
tN1 [mm] tII [mm]
0.4 0.5 0.55 0.63 0.75 0.88 1 1.13 1.25 1.5 2
VR,k [kN] 0.4 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57
0.5 0.57 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95
0.55 0.57 0.95 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19
0.63 0.57 0.95 1.19 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57
0.75 0.57 0.95 1.19 1.57 2.15 2.15 2.15 2.15 2.15 2.15 2.15
0.88 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1.13 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
1.25 0.57 0.95 1.19 1.57 2.15 2.87 2.87 2.87 2.87 2.87 2.87
NR,k [kN] 0.4 0.33 0.54 0.61 0.71 0.88 1.31 1.42 1.42 1.42 1.42 1.42
0.5 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.46 2.46
0.55 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.6 2.6
0.63 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 2.81
0.75 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.14
0.88 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.14
1 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.14
1.13 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.14
1.25 0.33 0.54 0.61 0.71 0.88 1.31 1.59 1.9 2.18 2.76 3.14
  • Above mentioned values are characteristic values
  • To determine the design value we advise to apply a material factor or γm = 1,33
Materials
Screw SS 1.4006 (SUS410) - conform EN3506
Bond washerSS 1.4301 (A2) - conform EN3506
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
mm