SANDWICH PANEL SCREW DP2

SANDWICH PANEL SCREW DP2

Wood - Galvanised Article number: 10040263

Washer diameter:
19 mm
- 16 mm
- 19 mm
- 22 mm
Coating:

Base

Application

Sandwich panels Galvanised Wood

Specifications

Head style 5/16” (8 mm)
Washer diameter standard 19 mm
Galvanised EPDM bond seal
Support thread
Thread for substructure wood
Drilling point 2 reduced

Options

Powder coated in any desired RAL colour
Washer diameter 16 or 22 mm

Certificates

Section

Applications

Using the table below, the correct length of the fastener can easily be determined.

Size	Minimal Insulation thickness													Article code
	0.0	20.0	40.0	60.0	80.0	100.0	120.0	140.0	160.0	180.0	200.0	220.0	240.0
6,3/7,0 x 75 mm	0 - 25 mm													1004026307519
6,3/7,0 x 100 mm	0 - 50 mm													1004026310019
6,3/7,0 x 125 mm	0 - 75 mm													1004026312519
6,3/7,0 x 145 mm	0 - 95 mm													1004026314519
6,3/7,0 x 165 mm	0 - 115 mm													1004026316519
6,3/7,0 x 185 mm	0 - 135 mm													1004026318519
6,3/7,0 x 205 mm	0 - 155 mm													1004026320519
6,3/7,0 x 225 mm	0 - 175 mm													1004026322519
6,3/7,0 x 245 mm	0 - 195 mm													1004026324519
6,3/7,0 x 265 mm	0 - 215 mm													1004026326519
6,3/7,0 x 300 mm	0 - 250 mm													1004026330019

Order information

Product	Size (L)	Packaging	Article code
Sandwich Panel Screw 6,3/7,0 x 75 – DP2	75 mm	100 pcs/box	1004026307519
Sandwich Panel Screw 6,3/7,0 x 100 – DP2	100 mm	100 pcs/box	1004026310019
Sandwich Panel Screw 6,3/7,0 x 125 – DP2	125 mm	100 pcs/box	1004026312519
Sandwich Panel Screw 6,3/7,0 x 145 – DP2	145 mm	100 pcs/box	1004026314519
Sandwich Panel Screw 6,3/7,0 x 165 – DP2	165 mm	100 pcs/box	1004026316519
Sandwich Panel Screw 6,3/7,0 x 185 – DP2	185 mm	100 pcs/box	1004026318519
Sandwich Panel Screw 6,3/7,0 x 205 – DP2	205 mm	100 pcs/box	1004026320519
Sandwich Panel Screw 6,3/7,0 x 225 – DP2	225 mm	100 pcs/box	1004026322519
Sandwich Panel Screw 6,3/7,0 x 245 – DP2	245 mm	100 pcs/box	1004026324519
Sandwich Panel Screw 6,3/7,0 x 265 – DP2	265 mm	100 pcs/box	1004026326519
Sandwich Panel Screw 6,3/7,0 x 300 – DP2	300 mm	100 pcs/box	1004026330019

Mechanical properties

16 mm

19 mm

22 mm

Materials
Screw	Galvanised steel
Bond washer	Galvanised steel
Material A (tl)	S280GD, S320GD and S350GD conform EN 10346
Material B (tll)	Wood ≥ C24 conform DIN EN 338
Drilling capacity	Wood ≥ 30 mm

Washer diameter 16 mm

		tN1[mm]	tII[mm]
			30	40	50	60	70	80	100	120	140	>160
	VR,k [kN]	0.4	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74
		0.5	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17
		0.55	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35
		0.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63
		0.75	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		0.88	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1.13	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1.25	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
	NR,k [kN]	0.4	1.33	1.33	1.33	1.33	1.33	1.33	1.33	1.33	1.33	1.33
		0.5	2.18	2.18	2.18	2.18	2.18	2.18	2.18	2.18	2.18	2.18
		0.55	2.24	2.24	2.24	2.24	2.24	2.24	2.24	2.24	2.24	2.24
		0.63	2.35	2.35	2.35	2.35	2.35	2.35	2.35	2.35	2.35	2.35
		0.75	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.88	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1.13	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1.25	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
	u [mm]	40	8	8	8	8	8	8	8	8	8	8

Above mentioned values are characteristic values
To determine the design value we advise to apply a material factor of γm = 1,33

Materials
Screw	Galvanised steel
Bond washer	Galvanised steel
Material A (tl)	S280GD, S320GD and S350GD conform EN 10346
Material B (tll)	Wood ≥ C24 conform DIN EN 338
Drilling capacity	Wood ≥ 30 mm

Washer diameter 19 mm

		tN1 [mm]	tII [mm]
			30	40	50	60	70	80	100	120	140	>160
	VR,k [kN]	0.4	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74
		0.5	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17
		0.55	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35
		0.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63
		0.75	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		0.88	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1.13	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1.25	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
	NR,k [kN]	0.4	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
		0.5	2.39	2.39	2.39	2.39	2.39	2.39	2.39	2.39	2.39	2.39
		0.55	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.63	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.75	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.88	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1.13	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1.25	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
	u [mm]	40	8	8	8	8	8	8	8	8	8	8

Above mentioned values are characteristic values
To determine the design value we advise to apply a material factor of γm = 1,33

Materials
Screw	Galvanised steel
Bond washer	Galvanised steel
Material A (tl)	S280GD, S320GD and S350GD conform EN 10346
Material B (tll)	Wood ≥ C24 conform DIN EN 338
Drilling capacity	Wood ≥ 30 mm

Washer diameter 22 mm

		tN1 [mm]	tII [mm]
			30	40	50	60	70	80	100	120	140	>160
	VR,k [kN]	0.4	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74	0.74
		0.5	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17	1.17
		0.55	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35
		0.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63
		0.75	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		0.88	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1.13	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
		1.25	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05	2.05
	NR,k [kN]	0.4	1.71	1.71	1.71	1.71	1.71	1.71	1.71	1.71	1.71	1.71
		0.5	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.55	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.63	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.75	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		0.88	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1.13	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
		1.25	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41	2.41
	u [mm]	40	8	8	8	8	8	8	8	8	8	8

Above mentioned values are characteristic values
To determine the design value we advise to apply a material factor of γm = 1,33

Materials
Screw	Galvanised steel
Bond washer	Galvanised steel
Material A (tl)	S280GD, S320GD and S350GD conform EN 10346
Material B (tll)	Wood ≥ C24 conform DIN EN 338
Drilling capacity	Wood ≥ 30 mm

mm